The OEV262H is a 26" LCD monitor which is able to display full HD images and has been designed specifically for use with Olympus endoscopy systems. It has a range of display modes including PIP and POP, to allow the optimal display of images, and multiple input terminals, ensuring compatibility with a wide range of image sources.
Brochure26-inch Full HD LCD panel with a 16:9 aspect ratio, high brightness, high contrast, and high gradation images.
FLIP functions (such as mirror and 180° rotation) which provide suitable display pattern and monitor layout for the procedure.
Multi-modality display capability, including Picture in Picture (PIP), Picture out Picture (POP), and Clone Out*1 with various image size combinations.
Various input/output terminals, including 3G/HD/SD SDI (x2), DVI-I (x2), HD15, Y/C, and VIDEO.
Eco-friendly specifications by low power consumption, various power saving mode, lightweight and thin body compared to the predecessor*2.
A.I.M.E (Advanced Image Multiple Enhancer)*3 which supports to enhance the image quality of the OLYMPUS endoscopy system.
*1 Clone Out is the function that outputs the HD video signal (1080i/1080p) as displayed including PIP/POP image to the second monitor and recording device.
*2 HIGH DEFINITION LCD MONITOR OEV261H.
*3 A.I.M.E. (Advanced Image Multiple Enhancer) is the function that improves the resolution with saving the noise gain up.
LCD panel | Screen size | 26 inches | |
---|---|---|---|
Display devices | a-Si TFT active matrix | ||
Resolution | 1920x1080 dots(Full HD) | ||
Contrast ratio | 1400:1 | ||
Aspect ratio | 16:9 | ||
Viewing angle | 178°(Horizontal & Vertical) | ||
Number of colors | 1.07 billion | ||
Size | Dimensions | 626.8(W) x 392.2(H) x 79.6(D) mm | |
Weight | 7.8 kg | ||
Power Supply | LCD monitor | AC IN:100-240 V, 50/60 Hz, 0.96-0.47 A | |
DC IN:24 V, 3.6 A, 5 V, 0.03 A (supplied by optional AC adapter) | |||
Input | HD/SD | SDI (1) | BNC connector |
SDI (2) | |||
VIDEO | BNC connector | ||
Y/C | 4-pin mini-DIN | ||
HD15 | D-sub 15-pin | ||
DVI (1) | DVI-I connector | ||
DVI (2) | DVI-I connector | ||
Aux in (HD/SD-SDI) | BNC connector | ||
Output | HD/SD | SDI (1) | BNC connector With active - Through output and auto 75 Ω termination |
SDI (2) | |||
VIDEO | BNC connector With loop-through output and auto 75 Ω termination | ||
Y/C | 4-pin mini-DIN With active-through output | ||
HD15 | D-sub 15-pin With active-through output | ||
DVI (1) | DVI-connector With active-through output | ||
DVI (2) | |||
Clone Out (3G/HD-SDI) | BNC connector | ||
Remote | RS-232Cconnector | D-sub 9-pin | |
Parallel remoter | RJ-45 |
Optional HD15-BNC4P cable "SONY SMF-405" is required to achieve the connection with RGB signal between OEV262H and CV-260/CV-260SL.
For more information, please contact your OLYMPUS.
Ground- breaking resolving power for safe procedure
Brighter, more powerful NBI
Outstanding, true-to-life image quality
HDTV image quality and NBI
Long-life LED light source
Pre-freeze function
Ground-breaking resolving power for efficient diagnosis
Brighter, more powerful Narrow Band Imaging
Outstanding, true-to-life image quality
Ground-breaking resolving power for efficient diagnosis
Brighter, more powerful Narrow Band Imaging
Outstanding, true-to-life image quality