-
Reliability: Proven by OLYMPUS
Designed, developed, and manufactured by Olympus, the endoscope experts, this reprocessor offers reliability.
Speed: Speed and Efficiency
Fast reprocessing time and dual-scope reprocessing capability improves work efficiency with achieving high-level disinfection criteria.
Ease of Use: Excellent Operability
User-friendly design provides easy operation for smooth, stress-free use in daily endoscope usage and routine workflow.
-
Fast Reprocessing Time of Just 17 Minutes
The OER-5 can reprocess two Olympus flexible endoscopes in approximately 17 minutes. Simultaneous dual-scope reprocessing capability improves efficiency and reduces running costs.
High-level Disinfection and Cleaning Performance
In addition to ultrasonic and alkaline detergent cleaning, the OER-5 performs high-level disinfection using the
fast-acting PAA-based Acecide disinfectant. Specially created to be compatible with Olympus endoscopes, Acecide makes possible high-level disinfection in about 5 minutes, resulting in a short 17-minute cycle time.
Easy MRC Check
Acecide can be easily collected from a port on the OER-5 basin for fast MRC (Minimum Recommended Concentration) checking. This method saves time and minimizes stress.
Modified Manual Cleaning
The modified manual cleaning flow allows for easier reprocessing, eliminating over half of the manual cleaning steps, including flushing of the endoscope channels. The OER-5 reduces the amount of work involved with suctioning and flushing and streamlines endoscope reprocessing.
-
Operating Environment
Ambient Temperature
10 – 40°C (50 – 104°F)
Water Supply Flow
Recommended flow rate 17 L/min. or more (from the water supply/circulation nozzle)
Relative Humidity
30 – 85%
Standard Water
Between 0.1 – 0.5 MPa
(including water hammer)
Atmospheric Pressure
700 – 1060 hPa
Water Supply Temperature
5 – 28°C (41 – 82°F)
Specifications
Compatible Endoscopes
Olympus endoscopes Disinfectant Solution 1 Discharge through disinfectant collection (Refer to the provided “List of Compatible Discharge Method hose
Endoscopes/Connecting Tubes
”) 2 Discharge through drain hose 
for details. Reprocessing Basin Approx. 14 L
Number of Reprocessed
Endoscopes
Capacity
2 (1 with certain models) Quantity of cleaning fluid: Approx. 13 L
Water Quantity per Water quantity for rinsing after cleaning:
Cleaning Method
Outer surface: Ultrasonic cleaning, fluid Process Approx. 13 L
flushing cleaning Water quantity for rinsing after disinfection:
Channel interiors: Fluid flushing cleaning Approx. 34 L Valves: Ultrasonic cleaning, fluid flushing Disinfectant Solution Approx. 17.5 L
cleaning Tank Capacity
Disinfection Method
Outer surface: Immersion in disinfectant Disinfectant Solution Olympus-designated disinfectant solution solution Used (875 ml cassette bottles)
Channel interiors: Disinfectant solution
flushing and flooding Detergent Used Olympus-designated detergent
Valves: Immersion in disinfectant solution Visual Leakage
Cleaning Time Setting
1 – 10 min. (Setting adjustable in 1 min. Detection Bubble detection during immersion intervals)
Alcohol Flushing Automatic flushing/draining using a pump
Disinfection Time Setting
5 minutes, 10 minutes and compressor
Disinfectant Solution Heating setting
20°C (68°F) Dimensions 450 (W) x 955 (H) x 788 (D) mm
(If the temperature of disinfectant solution is Weight 120 kg (dry condition)
below 20°C, it is heated to 20°C (68°F))
Disinfectant Solution Heating method
Built-in heater in the reprocessing basin Voltage: 110,120,220,230,240 V AC
- Heating immediately before the disinfection Frequency: 50/60 Hz process in a Power Supply Rated input: 700VA
reprocessing program Voltage fluctuation: Within ±10%
- Heating before the start of a reprocessing Frequency fluctuation: Within ±1 Hz program
Water Discharge Method
Forced draining using a pump (Floor draining)
-
-
Endoscope ReprocessorOER-AW
Built-in sensors
Brochure
Inner design stays clean
Hands-free operation
-
